ASSESSMENT OF HEAT GENERATION DURING IMPLANT INSERTION

Statement of problem. Many studies have investigated the heat generated during implant preparation, but data are needed to better predict heat generation during implant insertion. Purpose. The purpose of this study was to measure the heat generated during insertion of an implant at speeds of 30, 50, and 100 rpm, and with manual insertion. Material and methods. Sixty-four uniform fresh bovine femoral cortical bone specimens were used. After the cortical bone was drilled, 3 different implant insertion speeds and the manual insertion of the implant were evaluated for 2 different implant diameters. The temperature was measured with 2 Teflon-insulated, type K thermocouples. Data were analyzed by 2way ANOVA, and the Tukey honestly significant difference test (Gc=.05). Results. The highest thermal change for 4.1-mm-diameter implants was found at a speed of 100 rpm (9.81 C 2.29 C), and the lowest thermal change was 3.69 C 0.85 C at a speed of 30 rpm. A statistically significant difference was found between 100 rpm and the other 3 insertion procedures. The highest thermal change for a 4.8-mm-diameter implant was found at a speed of 100 rpm (8.79 C 1.53 C), and the lowest thermal change was 4.48 C 0.85 C at a speed of 30 rpm. No statistical difference was observed with manual, 30 rpm, and 50 rpm; however, a statistically significant difference was found between 100 rpm and the other 3 insertion procedures. Conclusions. Manual implant insertion and at speeds of 30 rpm and 50 rpm generated lower heat compared with insertion at 100 rpm. (J Prosthet Dent 20:14;112:522-525)

Yazar Sumer, Mahmut
Keskiner, Ilker
Mercan, Ugur
Misir, Ferhat
Cankaya, Soner
Yayın Türü Article
Tek Biçim Adres https://hdl.handle.net/20.500.12628/2120
Tek Biçim Adres 10.1016/j.prosdent.2013.12.011
Koleksiyonlar Araştırma Çıktıları | WoS | Scopus | TR-Dizin | PubMed | SOBİAD
PubMed İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu
Dergi Adı JOURNAL OF PROSTHETIC DENTISTRY
Dergi Cilt Bilgisi 112
Dergi Sayısı 3
Sayfalar 522 - 525
Yayın Yılı 2014
Eser Adı
[dc.title]
ASSESSMENT OF HEAT GENERATION DURING IMPLANT INSERTION
Yazar
[dc.contributor.author]
Sumer, Mahmut
Yazar
[dc.contributor.author]
Keskiner, Ilker
Yazar
[dc.contributor.author]
Mercan, Ugur
Yazar
[dc.contributor.author]
Misir, Ferhat
Yazar
[dc.contributor.author]
Cankaya, Soner
Yayın Yılı
[dc.date.issued]
2014
Yayıncı
[dc.publisher]
MOSBY-ELSEVIER
Yayın Türü
[dc.type]
article
Özet
[dc.description.abstract]
Statement of problem. Many studies have investigated the heat generated during implant preparation, but data are needed to better predict heat generation during implant insertion. Purpose. The purpose of this study was to measure the heat generated during insertion of an implant at speeds of 30, 50, and 100 rpm, and with manual insertion. Material and methods. Sixty-four uniform fresh bovine femoral cortical bone specimens were used. After the cortical bone was drilled, 3 different implant insertion speeds and the manual insertion of the implant were evaluated for 2 different implant diameters. The temperature was measured with 2 Teflon-insulated, type K thermocouples. Data were analyzed by 2way ANOVA, and the Tukey honestly significant difference test (Gc=.05). Results. The highest thermal change for 4.1-mm-diameter implants was found at a speed of 100 rpm (9.81 C 2.29 C), and the lowest thermal change was 3.69 C 0.85 C at a speed of 30 rpm. A statistically significant difference was found between 100 rpm and the other 3 insertion procedures. The highest thermal change for a 4.8-mm-diameter implant was found at a speed of 100 rpm (8.79 C 1.53 C), and the lowest thermal change was 4.48 C 0.85 C at a speed of 30 rpm. No statistical difference was observed with manual, 30 rpm, and 50 rpm; however, a statistically significant difference was found between 100 rpm and the other 3 insertion procedures. Conclusions. Manual implant insertion and at speeds of 30 rpm and 50 rpm generated lower heat compared with insertion at 100 rpm. (J Prosthet Dent 20:14;112:522-525)
Açıklama
[dc.description]
WOS: 000341541100021
Açıklama
[dc.description]
PubMed: 24656407
Kayıt Giriş Tarihi
[dc.date.accessioned]
2019-12-23
Açık Erişim Tarihi
[dc.date.available]
2019-12-23
Yayın Dili
[dc.language.iso]
eng
Haklar
[dc.rights]
info:eu-repo/semantics/closedAccess
ISSN
[dc.identifier.issn]
0022-3913
ISSN
[dc.identifier.issn]
1097-6841
İlk Sayfa Sayısı
[dc.identifier.startpage]
522
Son Sayfa Sayısı
[dc.identifier.endpage]
525
Dergi Adı
[dc.relation.journal]
JOURNAL OF PROSTHETIC DENTISTRY
Dergi Sayısı
[dc.identifier.issue]
3
Dergi Cilt Bilgisi
[dc.identifier.volume]
112
Tek Biçim Adres
[dc.identifier.uri]
https://dx.doi.org/10.1016/j.prosdent.2013.12.011
Tek Biçim Adres
[dc.identifier.uri]
https://hdl.handle.net/20.500.12628/2120
Görüntülenme Sayısı ( Şehir )
Görüntülenme Sayısı ( Ülke )
Görüntülenme Sayısı ( Zaman Dağılımı )
Görüntülenme
4
09.12.2022 tarihinden bu yana
İndirme
1
09.12.2022 tarihinden bu yana
Son Erişim Tarihi
09 Şubat 2024 09:56
Google Kontrol
Tıklayınız
insertion implant change thermal difference speeds generated manual during significant between lowest highest cortical statistically procedures different implants Prosthet Results 1-mm-diameter statistical Conclusions however Manual compared 8-mm-diameter observed Statement measured better Material measure purpose Purpose
6698 sayılı Kişisel Verilerin Korunması Kanunu kapsamında yükümlülüklerimiz ve çerez politikamız hakkında bilgi sahibi olmak için alttaki bağlantıyı kullanabilirsiniz.

creativecommons
Bu site altında yer alan tüm kaynaklar Creative Commons Alıntı-GayriTicari-Türetilemez 4.0 Uluslararası Lisansı ile lisanslanmıştır.
Platforms