Emir, Ahmet | Kaya, Hakan | Öztürk, Ertan
Proceedings | 2015 | 2015 23RD SIGNAL PROCESSING AND COMMUNICATIONS APPLICATIONS CONFERENCE (SIU) , pp.300 - 303
In this work, Orthogonal Frequency Division Multiplexing (OFDM) is implemented on TMS320C6713 Digital Signal Processors (DSP) Starter Kit (DSK). Transmitter, receiver and communication channel are all implemented on a same kit. Firstly the design is tested within Matlab Simulink environment, and then by configuring C6713 DSK parameters, Simulink blocks relating to C6713 DSK are added into the design. The machine codes generated by compiling the design are loaded to the DSP kit. By comparing the voice signals generated via the simulation and the card, the obtained results are validated.
Kara, Ferdi | Kaya, Hakan | Erkaymaz, Okan | Öztürk, Ertan
Proceedings | 2016 | Proceedings of the 2016 International Symposium on INnovations in Intelligent SysTems and Applications, INISTA 2016 , pp.300 - 303
In wireless communications, the cooperative communication (CC) technology promises performance gains compared to traditional Single-Input Single Output (SISO) techniques. Therefore, the CC technique is one of the nominees for 5G networks. In the Decode-And-Forward (DF) relaying scheme which is one of the CC techniques, determination of the threshold value at the relay has a key role for the system performance and power usage. In this paper, we propose prediction of the optimal threshold values for the best relay selection scheme in cooperative communications, based on Artificial Neural Networks (ANNs) for the first time in literatur . . .e. The average link qualities and number of relays have been used as inputs in the prediction of optimal threshold values using Artificial Neural Networks (ANNs): Multi-Layer Perceptron (MLP) and Radial Basis Function (RBF) networks. The MLP network has better performance from the RBF network on the prediction of optimal threshold value when the same number of neurons is used at the hidden layer for both networks. Besides, the optimal threshold values obtained using ANNs are verified by the optimal threshold values obtained numerically using the closed form expression derived for the system. The results show that the optimal threshold values obtained by ANNs on the best relay selection scheme provide a minimum Bit-Error-Rate (BER) because of the reduction of the probability that error propagation may occur. Also, for the same BER performance goal, prediction of optimal threshold values provides 2dB less power usage, which is great gain in terms of green communication. © 2016 IEEE Daha fazlası Daha az
Kaya, Hakan | Saraç, Zehra | Özer, Mahmut | Taşkın, Halit
Proceedings | 2010 | Proceedings of SPIE - The International Society for Optical Engineering7746 , pp.300 - 303
In this paper, the processing of interference fringes is achieved by Hartley transform method. The experimental and simulated interference fringe patterns are used for the signal analysis. Phase results are presented. These are compared with phase obtained by Fourier transform method. Disadvantages and advantages of Hartley transform method used for the evaluation of interference fringe patterns are given. © 2010 SPIE.