Osteogenic activities of polymeric soybean oil-g-polystyrene membranes

Tığlı-Aydın, Rahime Seda | Hazer, Baki | Acar, Merve | Gümüşderelioğlu, Menemşe

Article | 2013 | Polymer Bulletin70 ( 7 ) , pp.2065 - 2082

A novel biocompatible copolymer membrane was synthesized and characterized for use in guided bone regeneration using polymeric soybean oil-g-polystyrene (PSO-g-PS) graft copolymer which was successfully obtained by free radical polymerization of styrene initiated by PSO peroxide as a macroinitiator at 80 C. Osteoblastic cellular activities of MC3T3-E1 cells on PSO-g-PS membranes with different soybean oil composition (PSO-g-PS1, PSO-g-PS2, and PSO-g-PS3) were evaluated. Nuclear magnetic resonance (1H NMR) spectra showed that PSO inclusion (mol%) was found to be 27, 69, and 51 % for PSO-g-PS1, PSO-g-PS2, and PSO-g-PS3 membranes, resp . . .ectively. Superior biocompatibility of the PSO-g-PS membranes was determined compared to polystyrene tissue culture plates (TCPS) as positive control. Cell proliferation was enhanced on PSO-g-PS2 and PSO-g-PS3 membranes compared to PSO-g-PS1 membranes (p < 0.001), and a statistically significant higher ALP value of MC3T3-E1 cells on PSO-g-PS2 membranes (p < 0.05) suggested that proliferation and differentiation of preosteoblastic on PSO-g-PS membranes were enhanced with regard to soybean oil content within the membranes. Thus, the present study suggests that PSO-g-PS2 membranes, which showed a favorable biological environment for the preosteoblastic cells, can be well suited for bone tissue engineering applications. © 2013 Springer-Verlag Berlin Heidelberg Daha fazlası Daha az

Influence of Soybean Oil Blending with Polylactic Acid (PLA) Films: In Vitro and In Vivo Evaluation

Aydın, R. Seda Tığlı | Akyol, Elvan | Hazer, Baki

Article | 2017 | JAOCS, Journal of the American Oil Chemists' Society94 ( 3 ) , pp.413 - 424

Due to the great interest in oil-based polymers, which are prepared from renewable resources, different forms and amounts of soybean oil-based PLA films were prepared and evaluated for their potential usage as a medical biomaterial. Soybean oil, epoxidized soybean oil and auto-oxidized soybean oil were blended with PLA and PLA/oil films with appropriate oil amounts [2, 7, 14 and 20% (w/w)] were obtained by solvent casting. Thermal stability and plasticization effect were determined by adjusting oil amounts and type. Epoxidized soybean oil blended films showed the smallest increase in elongation breaks (13–20%) and the highest decrea . . .se in thermal decomposition temperatures (364–327 °C) compared to other oil blended films. In vitro quantitative and qualitative cytotoxicity results showed no reactivity (grade 0) for the L929 cells treated with 14% (w/w) oil blended PLA films. In vivo irritation and implantation tests concluded that 14% (w/w) oil blended PLA films were non-irritant. No erythema, no oedema reactions, no traumatic necrosis and foreign debris were observed. Thus, along with superior biocompatibility, PLA/oil films can replace petroleum-based products for several biomedical uses. © 2017, AOCS Daha fazlası Daha az

Soybean oil based polylactic acid membranes: Synthesis and degradation characteristics

Aydın Tığlı, R. Seda | Akyol, Elvan | Hazer, Baki

Article | 2018 | Journal of Polymers and the Environment26 ( 3 ) , pp.1262 - 1271

Controlling the degradation parameters is one of the main challenges of preparing appropriate biomaterials for biomedical applications. In this study, the effect of soybean oil inclusion on hydrolytic degradation of polylactic acid (PLA) was investigated both in vitro and in vivo. PLA/oil membranes were prepared by using polymeric soybean oil (PSO), epoxidized soybean oil and soybean oil (SOYA) with their varied concentrations. Degradation of membranes was performed in vitro for 8 weeks period and in vivo for 4 weeks period. Weight loss, changes in molecular weight, thermal properties and morphological changes were studied during de . . .gradation. SOYA blended PLA membranes show the lowest degradation rates by bulk degradation after 4 weeks in vitro, followed by surface erosion for the first week. Approximately twofold high percentage weight losses of all membranes were obtained after 4 weeks of degradation in vivo in comparison with in vitro data. The significant weight loss, molecular weight loss and thermal property change for PSO blended membranes were determined during in vivo degradation which highlights the increase of degradation rate by bulk degradation. Drastic morphological changes were observed on surface of degraded membranes in vivo with large pores, cracks, fissures and large cavities. © 2017, Springer Science+Business Media New York Daha fazlası Daha az

6698 sayılı Kişisel Verilerin Korunması Kanunu kapsamında yükümlülüklerimiz ve çerez politikamız hakkında bilgi sahibi olmak için alttaki bağlantıyı kullanabilirsiniz.

Bu site altında yer alan tüm kaynaklar Creative Commons Alıntı-GayriTicari-Türetilemez 4.0 Uluslararası Lisansı ile lisanslanmıştır.