Filtreler
Filtreler
Bulunan: 1 Adet 0.001 sn
Physical and mechanical properties of composite cements [Physikalische und mechanische Eigenschaften von Kompositzementen]

Yüksel I. | Özkan Ö.

Article | 2009 | ZKG International62 ( 12 ) , pp.54 - 63

This paper reports on the results of an experimental study conducted to evaluate the physical properties and strength development of composite cements manufactured with a steel slag (SS) and blast-furnace slag (BFS) combination. The influence of the proportions and fineness of the slag on the compressive strength of the cement blends are presented. Test results showed that the physical properties of the composite Portland cement series were affected by the BFS-SS substitution.The BFS-SS combination used for replacement gave better results when they were ground finer than the Portland cement clinker.The increase in Blaine fineness of . . . the BFS-SS combination had a positive effect on the compressive strength.The substitution ratio can be raised to 60 to 80% provided the slag fineness value is 4600 cm2/g Daha fazlası Daha az

6698 sayılı Kişisel Verilerin Korunması Kanunu kapsamında yükümlülüklerimiz ve çerez politikamız hakkında bilgi sahibi olmak için alttaki bağlantıyı kullanabilirsiniz.

creativecommons
Bu site altında yer alan tüm kaynaklar Creative Commons Alıntı-GayriTicari-Türetilemez 4.0 Uluslararası Lisansı ile lisanslanmıştır.
Platforms